Emergency

Search Results for: hard drives

Setting up XFS on Hardware RAID — the simple edition

There are about a gazillion FAQs and HOWTOs out there that talk about XFS configuration, RAID IO alignment, and mount point options.  I wanted to try to put some of that information together in a …


Aligning IO on a hard disk RAID – the Theory

Now that flash storage is becoming more popular, IO alignment question keeps popping up more often than it used to when all we had were rotating hard disk drives. I think the reason is very …


Percona Server Scales Vertically with Virident tachIOn Drives

We’ve published a new white paper that explains how to stop sharding and start scaling vertically with PCI-E flash drives, specifically the Virident tachIOn drive, which offers consistent, low-latency IO performance. I’ve been beating this …


The perils of uniform hardware and RAID auto-learn cycles

Last night a customer had an emergency in selected machines on a large cluster of quite uniform database servers. Some of the servers were slowing down in a very puzzling way over a short time …


Reference architecture for a write-intensive MySQL deployment

We designed Percona Cloud Tools (both hardware and software setup) to handle a very high-intensive MySQL write workload. For example, we already observe inserts of 1bln+ datapoints per day. So I wanted to share what …


Why %util number from iostat is meaningless for MySQL capacity planning

Earlier this month I wrote about vmstat iowait cpu numbers and some of the comments I got were advertising the use of util% as reported by the iostat tool instead. I find this number even more useless for …


Do not trust vmstat IOwait numbers

I’ve been running a benchmark today on my old test box with conventional hard drives (no raid with BBU) and noticed something unusual in the CPU utilization statistics being reported. The benchmark was run like …


Inexpensive SSDs for Database Workloads

The cost of SSDs has been dropping rapidly, and at the time of this writing, 2.5-drives have reached the 1TB capacity mark.  You can actually get inexpensive drives for as little as 60 cents per …


Is there room for more MySQL IO Optimization?

I prefer to run MySQL with innodb_flush_method=O_DIRECT in most cases – it makes sure there is no overhead of double buffering and I can save the limited amount of file system cache I would normally …


Benchmarks of Intel 320 SSD 600GB

I have a chance to test a system with Intel 320 SSD drives (NewRelic provided me with an access to the server), and compare performance with SAS hard drives.