October 21, 2014

MySQL 5.5.8 and Percona Server on Fast Flash card (Virident tachIOn)

This is to follow up on my previous post and show the results for MySQL 5.5.8 and Percona Server on the fastest hardware I have in our lab: a Cisco UCS C250 server with 384GB of RAM, powered by a Virident tachIOn 400GB SLC card. To see different I/O patterns, I used different innodb_buffer_pool_size settings: 13G, […]

FlashCache: more benchmarks

Previously I covered simple case with FlashCache, when data fits into cache partitions, now I am trying to test when data is bigger than cache. But before test setup let me address some concern (which I also had). Intel X25-M has a write cache which is not battery backuped, so there is suspect you may […]

Level 2 Flash cache is there

As I mentioned in my talk An Overview of Flash Storage for Databases I see in the near and middle term future a lot of interest for using Flash storage in Level 2 caching level. The price-capacity trade-off makes Flash as the very good fit for a cache layer. Actually it is not the new […]

When would you use SAN with MySQL ?

One question which comes up very often is when one should use SAN with MySQL, which is especially popular among people got used to Oracle or other Enterprise database systems which are quite commonly deployed on SAN. My question in such case is always what exactly are you trying to get by using SAN ?

How Percona tested Percona Server 5.6: A world premiere in advanced testing

8PM. One of the servers found a critical bug. Hop online and discuss, log bug. 10PM. Patch ready. 10:30PM. New build ready. 10:45PM. New RQG run initiated. This was by no means an uncommon sight during the months of testing that went into Percona Server 5.6, in fact it was commonplace. At a certain point, […]

Inexpensive SSDs for Database Workloads

The cost of SSDs has been dropping rapidly, and at the time of this writing, 2.5-drives have reached the 1TB capacity mark.  You can actually get inexpensive drives for as little as 60 cents per GB. Even inexpensive SSDs can perform tens of thousands of IOPs and come with 1.5M – 2M hous MTBF and […]

InnoDB performance optimization basics (redux)

I recently stumbled upon a post that Peter Zaitsev published back in 2007 titled “Innodb Performance Optimization Basics.” It’s a great post and reading it inspired me to examine what’s changed in the nearly six years that have followed in terms of MySQL, Percona Server – as well as in all of the other now-available […]

Considering TokuDB as an engine for timeseries data

I am working on a customer’s system where the requirement is to store a lot of timeseries data from different sensors. For performance reasons we are going to use SSD, and therefore there is a list of requirements for the architecture: Provide high insertion rate Provide a good compression rate to store more data on […]

The relationship between Innodb Log checkpointing and dirty Buffer pool pages

This is a time-honored topic, and there’s no shortage of articles on the topic on this blog. I wanted to write a post trying to condense and clarify those posts, as it has taken me a while to really understand this relationship. Some basic facts Most of us know that writing into Innodb updates buffer […]

Looking for RAID Controller without Battery Learning problems ?

A lot have been written about Battery Learning Cycle problems and its impact to MySQL Performance. Here are couple of links (1,2). It is good to see though there are some controllers coming out which solve this problem, namely Adaptec 5Z series controllers (Z stands for Zero Maintenance). This is not quite new technology they […]